Hallett Regular Hole Gutter Screen 100' Hallett Regular Hole Gutter Screen 100' Hallett Gutter Supply Description: The Hallett Regular Hole Gutter Screen is designed with a case-style lip, and is made using powder coated 22-gauge galvanized steel here in the USA. Hallett Regular Hole Gutter Screen is a compression-fit product with 5/16” holes that is installed by pressing the screen against the inside of the gutter over the hanger, then popping it into place on the outer lip. The step-down allows the screen to sit a little higher so you don’t have the risk of any of the hanger screws becoming an issue in installation Hallett Regular Hole Gutter Screens are designed with a case-style lip on the outer edge so it presses against the top of the gutter channel. Regular and Small Hole are available flat or with a step-down in the back that goes inside the gutter. (The step-down is a ledge that allows the screen to fit over hangers that have screws protruding.) Step Down 5” - $0.84 per linear foot 6” - $0.90 per linear foot Regular 5” - $0.84 per linear foot 6” - $0.90 per linear foot Features: Comes in 4 ft. sections (100 ft. carton contains 25 pieces) Available in 5” and 6” options Less than 5/16" openings Available with Step Down or Regular design 20-year warranty on finish 22-gauge galvanized steel Powder Coated

Hallett Regular Hole Gutter Screen 100'

Code: UGR5sd
$84.00
In Stock
Category: Gutter Protection
  • MADE IN THE USA

  • FREE SHIPPING ON CONTINENTAL U.S. ORDERS ABOVE $150

Description:

The Hallett Regular Hole Gutter Screen is designed with a case-style lip, and is made using powder coated 22-gauge galvanized steel here in the USA. Hallett Regular Hole Gutter Screen is a compression-fit product with 5/16” holes that is installed by pressing the screen against the inside of the gutter over the hanger, then popping it into place on the outer lip. The step-down allows the screen to sit a little higher so you don’t have the risk of any of the hanger screws becoming an issue in installation

Hallett Regular Hole Gutter Screens are designed with a case-style lip on the outer edge so it presses against the top of the gutter channel. Regular and Small Hole are available flat or with a step-down in the back that goes inside the gutter. (The step-down is a ledge that allows the screen to fit over hangers that have screws protruding.)

Step Down

5” - $0.84 per linear foot

6” - $0.90 per linear foot

Regular

5” - $0.84 per linear foot

6” - $0.90 per linear foot

Features:

  • Comes in 4 ft. sections (100 ft. carton contains 25 pieces)
  • Available in 5” and 6” options
  • Less than 5/16" openings
  • Available with Step Down or Regular design
  • 20-year warranty on finish
  • 22-gauge galvanized steel
  • Powder Coated

Description:

The Hallett Regular Hole Gutter Screen is designed with a case-style lip, and is made using powder coated 22-gauge galvanized steel here in the USA. Hallett Regular Hole Gutter Screen is a compression-fit product with 5/16” holes that is installed by pressing the screen against the inside of the gutter over the hanger, then popping it into place on the outer lip. The step-down allows the screen to sit a little higher so you don’t have the risk of any of the hanger screws becoming an issue in installation

Hallett Regular Hole Gutter Screens are designed with a case-style lip on the outer edge so it presses against the top of the gutter channel. Regular and Small Hole are available flat or with a step-down in the back that goes inside the gutter. (The step-down is a ledge that allows the screen to fit over hangers that have screws protruding.)

Step Down

5” - $0.84 per linear foot

6” - $0.90 per linear foot

Regular

5” - $0.84 per linear foot

6” - $0.90 per linear foot

Features:

  • Comes in 4 ft. sections (100 ft. carton contains 25 pieces)
  • Available in 5” and 6” options
  • Less than 5/16" openings
  • Available with Step Down or Regular design
  • 20-year warranty on finish
  • 22-gauge galvanized steel
  • Powder Coated