Hallett Micro X Gutter Screen 100'

No. Hallett Gutter Screens are compression-fit products that install into your existing gutters — you press the screen against the inside of the gutter over the hanger, then pop it into place on the outer lip. No gutter replacement is required.

Hallett Gutter Screens sit inside the gutter and press against the outer lip. They do not fasten into or under the roofing material, so they do not depend on a shingle edge and can be used with metal and other roof types. Need further consultation on your specific roof type? Find an installer near you

The perforated steel screen keeps debris out of the gutter channel while allowing water through. Smaller openings block more debris. As with any gutter screen, debris can accumulate on top of the screen and may need to be cleared periodically, but it stays out of the gutter itself.

Yes. The perforated design across the full width of the gutter provides a large open area for water intake, so rainwater passes through readily during heavy rain.

This depends on the hole size you choose. Micro X (1/16") offers the most protection against fine debris such as pine needles and shingle grit. Small Hole (3/16") blocks leaves and most medium debris. Regular Hole (5/16") is intended primarily for larger debris such as leaves and twigs.

Hallett Gutter Screens are made from 22-gauge galvanized steel with a powder-coated finish, built to resist rust and hold up to weather exposure.

Installation is compression-fit and requires no additional hardware. You press the screen against the inside of the gutter over the hanger, then pop it into place under the gutter's outer lip. The case-style lip presses against the top of the gutter channel for a gap-free fit.

Hallett Gutter Screens are among our easiest products to install and require no additional tools or hardware, but Hallett will always recommend working with a professional installer to ensure our products work as intended.

Yes. Hallett Micro X Gutter Screen is proudly made in the USA.