Hallett Small Hole Gutter Screen Hallett Small Hole Gutter Screen Hallett Gutter Cover Description: The Hallett Small Hole Gutter Screen is designed with a case-style lip, and is made using powder coated 22-gauge galvanized steel here in the USA. Hallett Small Hole Gutter Screen is a compression-fit product with 3/16” holes that is installed by pressing the screen against the inside of the gutter over the hanger, then popping it into place on the outer lip. The step-down allows the screen to sit a little higher so you don’t have the risk of any of the hanger screws becoming an issue in installation Hallett Small Hole Gutter Screens are designed with a case-style lip on the outer edge so it presses against the top of the gutter channel, and are also available flat or with a step-down in the back that goes inside the gutter. (The step-down is a ledge that allows the screen to fit over hangers that have screws protruding.) Step Down 5” - $0.80 per linear foot 6” - $0.86 per linear foot Regular 5” - $0.80 per linear foot 6” - $0.86 per linear foot Features: Comes in 4 ft. sections (100 ft. carton contains 25 pieces) Available in 5” and 6” options Less than 3/16" openings 22-gauge galvanized steel Powder coated Available with Step Down or Regular design 20-year warranty on finish

Hallett Small Hole Gutter Screen

Code: UGS5
$80.00
In Stock
Add to Wishlist Add to Compare
Category: Gutter Protection
  • HALLETT PRODUCTS BACKED BY 20 YEAR WARRANTY

  • MADE IN THE USA

  • FREE SHIPPIING ON ORDERS ABOVE $99

Description:

The Hallett Small Hole Gutter Screen is designed with a case-style lip, and is made using powder coated 22-gauge galvanized steel here in the USA. Hallett Small Hole Gutter Screen is a compression-fit product with 3/16” holes that is installed by pressing the screen against the inside of the gutter over the hanger, then popping it into place on the outer lip. The step-down allows the screen to sit a little higher so you don’t have the risk of any of the hanger screws becoming an issue in installation


Hallett Small Hole Gutter Screens are designed with a case-style lip on the outer edge so it presses against the top of the gutter channel, and are also available flat or with a step-down in the back that goes inside the gutter. (The step-down is a ledge that allows the screen to fit over hangers that have screws protruding.)


Step Down

5” - $0.80 per linear foot

6” - $0.86 per linear foot


Regular

5” - $0.80 per linear foot

6” - $0.86 per linear foot

Features:

Comes in 4 ft. sections (100 ft. carton contains 25 pieces)

Available in 5” and 6” options

Less than 3/16" openings

22-gauge galvanized steel

Powder coated

Available with Step Down or Regular design

20-year warranty on finish

    Description:

    The Hallett Small Hole Gutter Screen is designed with a case-style lip, and is made using powder coated 22-gauge galvanized steel here in the USA. Hallett Small Hole Gutter Screen is a compression-fit product with 3/16” holes that is installed by pressing the screen against the inside of the gutter over the hanger, then popping it into place on the outer lip. The step-down allows the screen to sit a little higher so you don’t have the risk of any of the hanger screws becoming an issue in installation


    Hallett Small Hole Gutter Screens are designed with a case-style lip on the outer edge so it presses against the top of the gutter channel, and are also available flat or with a step-down in the back that goes inside the gutter. (The step-down is a ledge that allows the screen to fit over hangers that have screws protruding.)


    Step Down

    5” - $0.80 per linear foot

    6” - $0.86 per linear foot


    Regular

    5” - $0.80 per linear foot

    6” - $0.86 per linear foot

    Features:

    Comes in 4 ft. sections (100 ft. carton contains 25 pieces)

    Available in 5” and 6” options

    Less than 3/16" openings

    22-gauge galvanized steel

    Powder coated

    Available with Step Down or Regular design

    20-year warranty on finish