Hallett Tru Flo 100'
Hallett Tru Flo 100'
$2.89 / 1ft
Sale Sold outSKU: UTF5
In stock
Couldn't load pickup availability
- MADE IN THE USA
- FREE SHIPPING ON CONTINENTAL U.S. ORDERS ABOVE $150
Hallett Tru Flo is our brand new gutter guard product, made in the USA with strong extruded aluminum that expands and contracts with your gutters, and #30 stainless steel mesh that will never rot or distort, keeping debris out of your gutters. Tru Flo’s U-Bend technology helps prevent water from running over your gutters, protecting your foundation from damage. Available for 5" and 6" gutters.
TRU FLO INSTALLATION TIPS
- Ensuring a Smooth Flow: Imagine your roof shingles as a ramp leading water towards the gutters. If a shingle is lifted or uneven, it creates a "roof ramp" that might send water cascading over the gutter guard instead of flowing into it. This can also cause water to sneak back under the shingle, potentially leading to leaks. To prevent this, you might need to make a slight adjustment at the back of the gutter guard, gently bending it to create a smooth transition for water flow.
- Finding the Perfect Pitch: On steeper roofs or for gutters hanging further below the roofline, the gutter guard's mesh trough might need a little tweaking. The ideal position is for the trough to sit slightly lower than the front lip of the gutter, by about 1/8th of an inch. This can be easily achieved by gently pressing down along the trough with your fingers. This ensures optimal water flow through the guard and into the gutter system.
- Sealing the Deal: Before securing the gutter guards with screws, double-check for any gaps between the gutter rail and the guard itself. These gaps can act like little escape routes for water runoff, defeating the purpose of the guards. In some cases, simply creating the proper trough position (as mentioned in point 2) can eliminate any existing gaps. By following these simple tips, you can ensure your gutter guards are installed for optimal performance, keeping your gutters flowing freely and your home protected from water damage.
Features
- 25 – 4ft panels; each box contains 100'
- Available in 5" and 6"
- 5" Width = 5 5/8"
- 6" Width = 7 1/4"
- Mill Finish
- Please click here for our
#8 x 1/2 Stainless Screws
- Please click here for our complete line of Gutter Guards
- Product Type: Extruded aluminum gutter guard with stainless steel mesh and U-Bend technology
- Material: Strong extruded aluminum that expands and contracts with your gutters, with #30 stainless steel mesh that will never rot or distort
- Available Sizes: 5" and 6"
- Finish: Mill finish
- Panel Width: 5" = 5 5/8" wide; 6" = 7 1/4" wide
- Panel Length: 25 × 4 ft panels; each box contains 100'
- Design: U-Bend technology helps prevent water from running over your gutters
- Trough Positioning: Mesh trough should sit approx. 1/8" lower than the front lip of the gutter for optimal flow
- Hardware: #8 × ½" stainless screws available separately
- Where It’s Made: Made in the USA with imported stainless steel mesh
Will I have to replace my gutters to install Hallett Tru Flo?
Will I have to replace my gutters to install Hallett Tru Flo?
No. Tru Flo installs onto your existing 5" or 6" gutters. The extruded aluminum frame is designed to expand and contract with your gutters. No gutter replacement is required.
Will Hallett Tru Flo work on metal or shake roofs?
Will Hallett Tru Flo work on metal or shake roofs?
Tru Flo's mesh trough sits in the gutter and the back edge can be gently bent to create a smooth transition for water flow from the roof surface. This adjustability helps it adapt to different roof profiles. Need further consultation on your specific roof type? Find an installer near you
Will anything clog Hallett Tru Flo?
Will anything clog Hallett Tru Flo?
Tru Flo uses #30 stainless steel mesh that will never rot or distort, keeping debris out of your gutters. The fine mesh blocks debris at the surface where rain and wind can clear it.
Will Hallett Tru Flo work during heavy rainfall?
Will Hallett Tru Flo work during heavy rainfall?
Yes. Tru Flo's U-Bend technology helps prevent water from running over your gutters, protecting your foundation from damage. For best performance, the mesh trough should sit about 1/8" lower than the front lip of the gutter.
Will Hallett Tru Flo block pine needles and leaves?
Will Hallett Tru Flo block pine needles and leaves?
Yes. The #30 stainless steel mesh is a fine weave designed to keep debris including pine needles and leaves out of the gutter channel.
How long will Hallett Tru Flo last?
How long will Hallett Tru Flo last?
Tru Flo is made with strong extruded aluminum that expands and contracts with your gutters, and #30 stainless steel mesh that will never rot or distort.
How is Hallett Tru Flo installed?
How is Hallett Tru Flo installed?
Tru Flo installs onto the gutter with the mesh trough positioned about 1/8" below the front lip of the gutter — this can be achieved by gently pressing down along the trough. Before securing with screws, check for gaps between the gutter rail and the guard, as these allow water to escape. If a roof shingle is lifted or uneven, gently bend the back of the guard to create a smooth transition for water flow.
Can I install Hallett Tru Flo myself, or do I need a professional?
Can I install Hallett Tru Flo myself, or do I need a professional?
Tru Flo is designed for a straightforward installation, but Hallett will always recommend working with a professional installer to ensure our products work as intended — correct trough height and a gap-free fit are what make the product perform.
Is Hallett Tru Flo made in the USA?
Is Hallett Tru Flo made in the USA?
Yes. Hallett Tru Flo is made in the USA with imported stainless steel mesh.
Share

So Grateful to find the Tru Flo. It speaks for itself in quality and performance
Would buy again.