Like any manual labor, gutter cover installation is a type of work that comes from the most basic idea: People do not want to do the job themselves because it takes a lot of effort. Given that you have chosen to capitalize on this fact and chose it as a career, it is never enough to just go ahead and install gutter covers on your clients’ roofs. The following guidelines would serve as a walkthrough for installers who wish to maximize their effort, time and profit.

Condition of Gutters and Roof

No matter how perfect the gutter cover installation will be, if the gutters and the roof are not in good condition prior to the installation, the gutter covers will be useless. New houses often do not have these problems but these should be thoroughly noted for old houses.

• Scan the roofing for broken shingles and loose nails if there are any.
• The gutters should have no holes and should be thoroughly cleaned before installation.
• Make sure that the downspout is not clogged.
• The pitch of the gutter should be right to ensure that the water would go down the gutter perfectly.

Proper Installation

After making sure that the gutters and the roof are in perfect condition, the following steps would help in making the installation faster and the gutter covers more effective.

• It is highly recommended to do the installation while on the roof rather than be on a ladder because it is faster that way.
• During the installation, make sure that you make the clip straight. When drilling, you will have to drill it down slowly to prevent the clips from moving.
• When pulling up shingles make sure that you do not pull it up too much. A small slit would do in order to insert the gutter covers. Pulling it up too much and inserting the gutter cover so much inside would result to rusting and thus damage both the roofing and the gutter covers making them less effective.
• It is also advisable and just makes sense to start installation from one edge to the next.

Choosing the Gutter Cover

Besides the preparation and the installation being done right, choosing the perfect gutter cover is the major part that should be noted. Homeowners usually entrust the choosing of which gutter covers will be installed to the installer. This gives the installers the full power to create win-win results. The following tips are few properties that gutters covers should have to maximize effectiveness and thus result to client’s satisfaction. Needless to say, effective gutter covers would mean not having to come back and answer to faulty gutter covers to do some fixing, cleaning, or worse, a refund. An effective gutter cover installation would also result to clients’ commendation to other people they know and thus entail more project for you.

Avoid Screens and Mesh

Regardless of how fancy these gutter cover companies present their patented mesh designs, holes would mean allowing tiny particles such as small acorns, pine needles, fuzzy strings and the like to fall and pile up down the gutter that may result to clogging. Mesh and screens are also very prone to icing which gives problems to home owners. No matter what kinds of trees or plantation are around the house as well as whatever type of climate the location offers, it is highly recommended that the gutter cover you choose has a solid design.

Use Stainless Steel Screws

Without the need for further explanation, using gutter cover that use stainless steel screws is the perfect option because these screws stand the test of climate and time. Rusting of the screws would result to rusting of the gutter covers, the gutter, the shingles and the list goes on. As an installer, you would never want that.

Avoid Snap-In Gutter Covers

There are gutter covers that are designed in such a way that installing them won’t require screws but instead they would just snap into place. This is often presented as the easiest and fastest way of installation that even house owners could do it themselves. Gutter companies who do these types of gutter covers boast that they are easy to install as well as easy to remove for cleaning. Installers might want to point out that the ease and speed that are being carried out by these gutter covers give the same ease and speed of them being torn down with the test of climate and time. Now that the client satisfaction part has been discussed, it is high time that the gutter properties that would prove to be advantageous for installers should be discussed.

Low Price, High Quality

Gutter cover companies such as Hallett Gutter Cover offers good deals for contractors. These gutter covers have the properties that are needed for efficient gutter cover installation. Since installation usually costs per foot, a gutter cover brand such as this one that is even half the price of most gutter covers allow installers to gain more profit. They sell their gutter covers per 100 ft. but may break them down if an installer would order a few more boxes.

Fast Installation

Obviously, this won’t be one of those gutter covers that “snap” into place. Hallet Gutter Covers is so easy and fast to install that Mr. Hallett and his cousin managed to install 1,460 ft. worth of gutter covers in 7 houses and have their feet at rest by 5:30pm. (This was done right after they have designed their gutter covers and they do not have expertise in regards to gutter installation.)

Reliability

It is very important that an installer’s gutter cover provider is reliable. It is very much advisable to make sure that the chosen gutter cover company has perfect inventory management and could deliver the same day. Hallet Gutter Cover always has a stock of their gutters that are available in 10 different colors. In fact, Hallett’s inventory is so huge that it would not even matter if you order boxes of gutter covers with each box a different one. After all’s been said and done, your work on your gutter cover installations will reflect your quality as an installer. These tips are just the right ones to follow to make effective, time efficient and larger profit gaining installer to be your identifier!