Hallett Rigid Flow Step Down 4ft lengths 200'
Hallett Rigid Flow Step Down 4ft lengths 200'
$1.64 / 1ft
Sale Sold outSKU: URF5sd/M
In stock
Couldn't load pickup availability
- MADE IN THE USA
- FREE SHIPPING ON CONTINENTAL U.S. ORDERS ABOVE $150
Hallett Rigid Flow Step Down is created in the USA with 19-gauge hi-temper aluminum which won't rust, rot, or distort, and is available in three colors. Hallett Step Down Rigid Flow is installed by fastening into the back of the inside of the gutter at the fascia and zip screwing it to the outer lip. If the gutter is set under the drip edge, this results in an easier installation.
Hallett Rigid Flow Step Down is created with a patented perf-flow filtration system that allows air circulation above and below the gutter, through the holes, and into the gutter channel so that a gentle breeze will blow away any debris. It has a ledge that is designed for the first third of the panel so that it can go in the gutter, while still allowing coverage over any hangers or screws that are set up high in the gutter.
Features:
- Patented perf-flow filtration
- Low Profile
- Comes in 4 ft. sections (200 ft. carton contains 50 pieces)
- Includes 150 – #10 x 1″ Hi-Hex Head Screw
- Includes 150 – #8 x 1/2″ Zip Screws in matching color
- Available in 5” and 6” options
- 5" = 5" wide; 6" = 6 1/8" wide
- .019 Gauge
- Available in mill, black, or white
- 20-year warranty on finish
- Please click here for Hallett 10 ft Step Down lengths (250 ft. carton contains 25 pieces)
- Please click here for Hallett Rigid Flow Copper - 4ft lengths (Sold by the Piece)
- Please click here for our complete line of Gutter Guards
- Product Type: Low-profile perforated aluminum gutter cover with step-down ledge
- Material: 19-gauge hi-temper aluminum — won't rust, rot, or distort
- Gauge: .019 gauge
- Available Sizes: 5" and 6"
- Panel Width: 5" = 5" wide; 6" = 6 1/8" wide
- Available Colors: Mill, Black, White
- Panel Length: 4 ft sections (200 ft carton contains 50 pieces)
- Design: Patented perf-flow filtration; low profile. Step-down ledge on the first third of the panel allows it to sit in the gutter while covering hangers or screws set high in the gutter
- Installation Method: Fastened into the back of the inside of the gutter at the fascia and zip screwed to the outer lip. Easier installation if the gutter is set under the drip edge
- Hardware Included: 150 × #10 × 1" hi-hex head screws; 150 × #8 × ½" zip screws in matching color
- Where It’s Made: Made in the USA
Will I have to replace my gutters to install Hallett Rigid Flow Step Down?
Will I have to replace my gutters to install Hallett Rigid Flow Step Down?
No. Rigid Flow Step Down installs into your existing gutter — fastened into the back of the inside of the gutter at the fascia and zip screwed to the outer lip. No gutter replacement is required.
Will Hallett Rigid Flow Step Down work on metal or shake roofs?
Will Hallett Rigid Flow Step Down work on metal or shake roofs?
Yes. Rigid Flow Step Down fastens to the gutter and fascia rather than under roofing material. The listing describes Rigid Flow as perfect for any pitched roof, metal roofs, and areas with high water flow.
Will anything clog Hallett Rigid Flow Step Down?
Will anything clog Hallett Rigid Flow Step Down?
Rigid Flow Step Down uses the same patented perf-flow filtration system, allowing air circulation above and below the gutter and into the gutter channel so a gentle breeze will blow away debris.
Will Hallett Rigid Flow Step Down work during heavy rainfall?
Will Hallett Rigid Flow Step Down work during heavy rainfall?
Yes. The perf-flow filtration system moves water through the holes into the gutter channel, and Rigid Flow is specifically described as suited to areas with high water flow.
Will Hallett Rigid Flow Step Down block pine needles and leaves?
Will Hallett Rigid Flow Step Down block pine needles and leaves?
Yes. The perforated surface keeps leaves and pine needles out of the gutter channel, and the perf-flow air circulation helps clear debris off the top of the panel.
How long will Hallett Rigid Flow Step Down last?
How long will Hallett Rigid Flow Step Down last?
Rigid Flow Step Down is created with 19-gauge hi-temper aluminum which won't rust, rot, or distort.
How is Hallett Rigid Flow Step Down installed?
How is Hallett Rigid Flow Step Down installed?
Rigid Flow Step Down is installed by fastening into the back of the inside of the gutter at the fascia and zip screwing it to the outer lip. If the gutter is set under the drip edge, this results in an easier installation.
Can I install Hallett Rigid Flow Step Down myself, or do I need a professional?
Can I install Hallett Rigid Flow Step Down myself, or do I need a professional?
Rigid Flow Step Down is designed for a straightforward installation with all screws included, but Hallett will always recommend working with a professional installer to ensure our products work as intended.
Is Hallett Rigid Flow Step Down made in the USA?
Is Hallett Rigid Flow Step Down made in the USA?
Yes. Hallett Rigid Flow Step Down is proudly made in the USA.
What is the difference between Rigid Flow and Rigid Flow Step Down?
What is the difference between Rigid Flow and Rigid Flow Step Down?
The Step Down version has a ledge designed into the first third of the panel. This lets the panel sit down in the gutter while still clearing any hangers or screws that are set up high in the gutter. If your gutter is set under the drip edge, the Step Down design makes for an easier installation.
Share
