
Secure Gutter Hangers with #10 Hi Hex Screws and Neoprene Washers
Share
Don’t Let Fasteners Be the Weak Link
When it comes to a solid gutter installation, your hangers are only as strong as the screws holding them in place. The #10 x 1-½" Hi Hex Head Screw with Neoprene Washer is the preferred fastener for hidden hangers because it grips tight, drives easy, and stays put—even in wet conditions.
Made with a ¼” hi hex head for better driver control and a neoprene washer for water-resistant sealing, these screws give your installs the security and longevity your customers expect.
Built for Hidden Hanger Performance
-
¼” hi hex head prevents slippage under the drill
-
Neoprene washer creates a tighter, water-resistant seal
-
1-½" length reaches deep for solid hold
-
Ideal for hidden hangers on 5” and 6” K-style systems
-
Available in 1,000 and 3,500 count boxes for bulk installs
These screws reduce the risk of spin-out and ensure a flush, professional finish on every hanger you install.
Specs Contractors Rely On
Feature |
Detail |
Size |
#10 x 1-½" |
Head Type |
¼” Hi Hex |
Washer |
Neoprene included |
Use |
Hidden hangers, gutter fastening |
Packaging |
1,000 ct or 3,500 ct boxes |
You don’t need anything fancy—just a strong screw that won’t strip or slide off the bit. This is it.
FAQs
What makes a hi hex head better?
The ¼” hex design gives your driver a deeper, more secure grip, which means fewer slips and stripped screws—especially when working overhead.
Why is the neoprene washer important?
It creates a more watertight connection, helping protect the wood fascia and backing material from water intrusion at the fastener point.
Can these be used on both wood and fascia board?
Yes. These screws are commonly used to anchor hidden hangers into wood fascia on residential and light commercial gutter systems.
Should I stock both box sizes?
Most crews keep a 3,500 ct box in the shop and pull from 1,000 ct boxes for individual jobs. Both options give you flexibility and cost-efficiency.
Fasteners That Get the Job Done Right
Avoid callbacks and sloppy installs by using the right screw the first time. The #10 x 1-½" Hi Hex with Neoprene Washer gives your gutter hangers the grip and seal they need.